3-13
Chapter 3: BIOS setup
DMI Link ASPM Control
Allows you to disable or control Active State Power Management on SA side
of the DMI link. Configuration options: [Disabled] [L0s] [L1] [L0sL1][Auto]
3.3.18
Network Stack Configuration
Network Stack
This item allows user to disable or enable the UEFI network stack. Configuration
options: [Disabled] [Enabled]
The following two items appear only when you set the previous item to
[Enabled].
Ipv4 PXE Support
This item allows user to disable or enable the Ipv4 PXE Boot support.
Configuration options: [Disabled] [Enabled]
Ipv6 PXE Support
This item allows user to disable or enable the Ipv6 PXE Boot support.
Configuration options: [Disabled] [Enabled]
3.4
Hardware Monitor menu
The Hardware Monitor menu displays the system temperature/power status, and
allows you to change the fan settings.
CPU / MotherBoard Temperature
The onboard hardware monitor automatically detects and displays the CPU/
motherboard temperatures.
CPU / Chassis Fan Speed
The onboard hardware monitor automatically detects and displays the CPU /
chassis fan speeds in rotations per minute (RPM). If the fan is not connected to the
motherboard, the field shows N/A. Select Ignore if you do not wish to display the
detected speed.
CPU Core Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage
The onboard hardware monitor automatically detects the voltage output through
the onboard voltage regulators. Select Ignore if you do not want to detect this item.
Smart Fan Mode
Allows you to select the Smart Fan mode. Configuration options: [Disabled]
[Normal] [Manual Mode]
The following items appear when you set
Smart Fan Mode
to
[Manual Mode]
.
