H310I-IM-A R3.0
2-10
2.5 Jumpers
1. Clear RTC RAM (2-pin CLRTC)
This header allows you to clear the CMOS RTC RAM data of the system
setup information such as date, time, and system passwords.
To erase the RTC RAM:
1. Turn OFF the computer and unplug the power cord.
2. Use a metal object such as a screwdriver to short the two pins.
3. Plug the power cord and turn ON the computer.
4. Hold down the
<Del>
key during the boot process and enter BIOS setup
to re-enter data.
NOTE:
If the steps above do not help, remove the onboard battery and move
the jumper again to clear the CMOS RTC RAM data. After clearing the CMOS,
reinstall the battery.
2. Display panel backlight power selection (3-pin BLKT_PWR_SEL)
Pins
12V (Default)
1-2
19V
2-3
CLRTC
+3V_BAT_RTC
GND
PIN 1
1 2
2 3
12V
(Default)
19V
BLKT_PWR_SEL
