21
Using the Wake-on-LAN
If you want to wake up your computer using the smart device, ensure that you enable the
computer’s Wake-on-LAN settings.
To configure your computer’s Wake-on-LAN settings:
1.
From BIOS Setup, go to
Advanced > APM
Configuration
then set
Power On By
PCI-E/PCI
to
[Enabled]
.
2.
From Windows
®
OS, do the following:
a. On your desktop, click
Start
, right-click
Computer
> Manage
to launch the
Computer Management screen.
b. Click
Device Manager
to view all the installed devices.
c. Click
Network Adapters
, right-click the installed module card (Broadcom or
Atheros) then click
Properties > Power Management
tab.
d. Tick these items
Allow this device to wake up the computer
and
Only allow a
magic packet to wake the computer
.
For 802.11ac standard Wi-Fi GO! Card, the Wake-on-LAN function will be supported in the
later version for Windows
®
8 operating system.
