Asus Z87-Deluxe/Dual User Manual Download Page 155

Page: 155 / 168

ASUS Z87-DELUXE/DUAL

5-1

Chapter 5

RAID support

5.1

RAID configurations

The motherboard comes with the Intel

Rapid Storage Technology that supports RAID 0,

RAID 1, RAID 10 and RAID 5 configuration.

If you want to install a Windows

operating system to a hard disk drive included in a RAID

set, you have to create a RAID driver disk and load the RAID driver during OS installation.

Refer to section

5.2 Creating a RAID driver disk

for details.

5.1.1

RAID definitions

RAID 0 (Data striping)

optimizes two identical hard disk drives to read and write data in

parallel, interleaved stacks. Two hard disks perform the same work as a single drive but at a

sustained data transfer rate, double that of a single disk alone, thus improving data access

and storage. Use of two new identical hard disk drives is required for this setup.

RAID 1 (Data mirroring)

copies and maintains an identical image of data from one drive to

a second drive. If one drive fails, the disk array management software directs all applications

to the surviving drive as it contains a complete copy of the data in the other drive. This RAID

configuration provides data protection and increases fault tolerance to the entire system. Use

two new drives or use an existing drive and a new drive for this setup. The new drive must be

of the same size or larger than the existing drive.

RAID 5

stripes both data and parity information across three or more hard disk drives. Among

the advantages of RAID 5 configuration include better HDD performance, fault tolerance, and

higher storage capacity. The RAID 5 configuration is best suited for transaction processing,

relational database applications, enterprise resource planning, and other business systems.

Use a minimum of three identical hard disk drives for this setup.

RAID 10

is data striping and data mirroring combined without parity (redundancy data) having

to be calculated and written. With the RAID 10 configuration you get all the benefits of both

RAID 0 and RAID 1 configurations. Use four new hard disk drives or use an existing drive

and three new drives for this setup.

Chapter 5:

RAID support

Summary of Contents for Z87-Deluxe/Dual









































































































































































Search results

Summary of Contents for Z87-Deluxe/Dual

Reviews:

Related manuals for Z87-Deluxe/Dual

Brands by name

Popular brands

Asus Z87-Deluxe/Dual, User Manual

Search results

Summary of Contents for Z87-Deluxe/Dual

Reviews:

Related manuals for Z87-Deluxe/Dual

Brands by name

Popular brands