Home
/
Asus
/
Z270-WS
/
Manual

Asus Z270-WS, Manual, Page: 95 / 112

Share

Page: 95 / 112

Asus Z270-WS Manual Download Page 95

ASUS Z270-WS

4-1

C

h

ap

te

r

4

RAID Support

4

Chapter 4:

RAID Support

4.1

RAID configurations

The motherboard supports Intel

®

Rapid Storage Technology with RAID 0, RAID 1, RAID 5,

and RAID 10 solution.

If you want to install a Windows

®

operating system to a hard disk drive included in a RAID

set, you have to create a RAID driver disk and load the RAID driver during OS installation.
Refer to section

4.2 Creating a RAID driver disk

for details.

4.1.1

RAID definitions

RAID 0 (Data striping)

optimizes two identical hard disk drives to read and write data in

parallel, interleaved stacks. Two hard disks perform the same work as a single drive but at a
sustained data transfer rate, double that of a single disk alone, thus improving data access
and storage. Use of two new identical hard disk drives is required for this setup.

RAID 1 (Data mirroring)

copies and maintains an identical image of data from one drive to

a second drive. If one drive fails, the disk array management software directs all applications
to the surviving drive as it contains a complete copy of the data in the other drive. This RAID

con guration provides data protection and increases fault tolerance to the entire system. Use

two new drives or use an existing drive and a new drive for this setup. The new drive must be
of the same size or larger than the existing drive.

RAID 5

strips both data and parity information across three or more hard disk drives. Among

the advantages of RAID 5 con guration include better HDD performance, fault tolerance, and

higher storage capacity. The RAID 5 con guration is best suited for transaction processing,

relational database applications, enterprise resource planning, and other business systems.
Use a minimum of three identical hard disk drives for this setup.

RAID 10

is data striping and data mirroring combined without parity (redundancy data) having

to be calculated and written. With the RAID 10 con guration you get all the bene ts of both

RAID 0 and RAID 1 con gurations. Use four new hard disk drives or use an existing drive

and three new drives for this setup.

«
...
93
94
95
96
97
...
»

Summary of Contents for Z270-WS

















































































































Reviews:

No comments