Asus Z10PA-D8 Series User Manual Download Page 171

Page: 171 / 186

Z10PA-D8 Series

6-19

5. Click

Install Drivers and Software

option to begin installation.

6.5

Installing the Intel

I210 Gigabit Adapters driver

This section provides the instructions on how to install the

Intel

I210 Gigabits Adapter

Driver

on the system.

To install the

Intel

I210 Gigabi

Adapters Driver

on the Windows

operating system:

Restart the computer.

2. Log on with

Administrator

privileges.

Insert the motherboard/system support DVD to the optical drive.

If Autorun is NOT enabled in your computer, browse the contents of the support DVD to

locate the file

ASSETUP.EXE

from the

BIN

folder. Double-click the

ASSETUP.EXE

to run

the support DVD.

4. Click

Intel

I350-AM1/I350-AM2/I210/X540-BT2 Gigabit Adapters Drivers

in the

Drivers

menu of the main screen to start the installation.

Summary of Contents for Z10PA-D8 Series



























































































































































































Search results

Summary of Contents for Z10PA-D8 Series

Reviews:

Asus Z10PA-D8 Series, User Manual, Page: 171 / 186

Search results

Summary of Contents for Z10PA-D8 Series

Reviews: