manualshive.com logo in svg

Asus X99-A/USB 3.1, Manual

Share
Download
Asus X99-A/USB 3.1 Manual Download Page 125

ASUS X99-A/USB 3.1

3-49

Chapter 3

Chassis Fan 1/4 Min. Duty Cycle(%) [60]

Use the <+> or <-> keys to adjust the minimum chassis fan duty cycle. The 

values may differ via Qfan tuning. 

Allow Fan Stop [Disabled]

This item allows the chassis fans to run at 0% duty cycle when the 

temperature of the source drops below the lower temperature.
Configuration options: [Disabled] [Enabled]

EXT Fan 1/3 Q-Fan Control [DC Mode]

These items allow you to set the extension fans’ Q-Fan control feature into DC Mode, PWM 

Mode, or disable these extension Q-Fan controls from your motherboard.
Configuration options: [Disabled] [DC Mode] [PWM Mode]

The following items appear only when you set the EXT 1/3 Q-Fan Control to 

[PWM Mode]

 

or 

[DC Mode]

.

EXT Fan 1/3 Q-Fan Source [CPU]

This item controls the assigned fan according to the selected temperature source.
Configuration options: [CPU] [MB] [VRM] [PCH] [T_SENSOR1] [EXT_SENSOR1] 

[EXT_SENSOR2] [EXT_SENSOR3]

If you select T_SENSOR1, plug a thermistor cable to T_SENSOR1 header and stick the 

thermistor cable’s head to the desired component as the temperature source.

EXT Fan 1/3 Speed Low Limit [300 RPM]

This item allows you to disable or set the extension fans’ warning speeds. 
Configuration options: [Ignore] [200 RPM] [300 RPM] [400 RPM] [500 RPM] [600 RPM]

EXT Fan 1/3 Profile [Standard]

This item allows you to set the appropriate performance level of the chassis fan.
[Standard] 

Set to make the chassis fan adjust automatically depending on the 

chassis temperature.

[Silent] 

Set to minimize the fan speed for quiet chassis fan operation.

[Turbo] 

Set to achieve maximum chassis fan speed.

[Manual] 

Set to assign detailed fan speed control parameters.

The following items appear only when you set the EXT Fan Profile to 

[Manual]

.

EXT 1/3 Upper Temperature [70]

Use the <+> or <-> keys to adjust the upper limit of the EXT 1/3 

temperature. The values range from 40°C to 90°C. 

EXT Fan 1/3 Max. Duty Cycle(%) [100]

Use the <+> or <-> keys to adjust the maximum extension fan duty cycle. 

The values may differ via Qfan tuning. 

Summary of Contents for X99-A/USB 3.1





















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands