ASUS WLAN Adapter
5
Quick Start Guide
English
Configuring with the WLAN utility (Ad Hoc)
The WLAN adapter supports Ad Hoc mode which allows communication
between wireless stations without an AP.
2. Click the Config button and set the
WLAN Card
to
Ad Hoc
connection mode.
3. Click the
Survey
button to scan for Ad
Hoc nodes. Select the node you want to
communicate with and press
Connect
.
4. If the encryption settings of your WLAN
Adapter are different from those of the
other Ad Hoc nodes, you are prompted
to make the encryption of the two nodes
identical. Click
Apply
to activate the
settings.
1. Right-click the wireless connection icon
and select
Wireless Settings.
5. Check the
Status
page to see the association
state. If connection is established, the box
shows “Connected - xx:xx:xx:xx:xx:xx”.
6. Check the
Connection
tab to see the
signal strength. Click
OK
to exit the utility.
