manualshive.com logo in svg

Asus WL-140, User Manual

Share
Download
Asus WL-140 User Manual Download Page 10

10

ASUS USB SpaceLink Client

Chapter 2 - Installation

Chapter 2

2.3 Installing the SpaceLink Driver

1. Turn ON your computer and enter Windows.

2. Connect the smaller end of the USB cable into the back of the ASUS

USB SpaceLink Client.

3. Insert the larger end of the USB cable into your computer’s USB port.

4. Windows will automatically detect the ASUS USB SpaceLink Client

once it is inserted. When the “Add New Hardware Wizard” dialog ap-
pears, click Next to begin driver installation.

5. Select “Search for the best driver for your device (Recommended)”.

Click Next to continue.

6. Specify the location with “[CD]\Card\Driver\USB” and click Next.

Where [CD] represents the drive letter of your CD-ROM drive.

7. Wait while Windows searches for the device driver for the ASUS USB

SpaceLink Client. Windows will display the search result: “ASUS
SpaceLink WL-140 WLAN USB Adapter”. Click Next.

8. During the installation, Windows may prompt you to insert the “Win-

dows Operating System CD” which contains some driver files. Insert
your Windows setup disc and type the path if necessary and click Yes.
Windows will start copying the necessary files.

9. When the installation procedure is completed, click Finish.

10. Restart your Windows to make the driver take effect.

Smaller End

(Rear View)

Larger End

Smaller End

(Side View)

Summary of Contents for WL-140



































































Reviews:

No comments

Brands by name

Popular brands

Load more brands