Asus WL-106gM User Manual Download

Page: 12 / 39

ASUS WLAN Card

Chapter 3 - Software Reference

Chapter 3

ftw

are

efe

ren

Using the Control Center

The Control Center taskbar icon displays the following information:

• Link quality of the WLAN Card (Excellent, Good, Fair, Poor, Not Linked)
• Whether the WLAN Card is connected to a network (Blue: Connected, Gray:

Not Connected)

Taskbar Icon and Status

Wireless Status Icons (on the taskbar)

Excellent

link quality and

connected to Internet

(Infrastructure)

Good

link quality and

connected to Internet

(Infrastructure)

Fair

link quality and

connected to Internet

(Infrastructure)

Poor

link quality and

connected to Internet

(Infrastructure)

Not linked

but

connected to Internet

(Infrastructure)

Excellent

link quality but

not connected to Internet

(Infrastructure)

Good

link quality but

not connected to Internet

(Infrastructure)

Fair

link quality but

not connected to Internet

(Infrastructure)

Poor

link quality but

not connected to Internet

(Infrastructure)

Not linked

and

not connected to Internet

(Infrastructure)

ASUS WLAN Control Center

ASUS WLAN Control Center is an application which makes it easier to launch

WLAN applications and activate network location settings. The WLAN Control

Center starts automatically when system boots. When WLAN Control Center is

running, you can see a Control Center icon on the Windows taskbar.

Starting the Control Center

• Select

ASUS WLAN Control Center

in Windows Start

menu, or

• Double-click the

ASUS WLAN Control Center

icon on the desktop.

3. Software Reference

Summary of Contents for WL-106gM








































Search results

Summary of Contents for WL-106gM

Reviews:

Related manuals for WL-106gM

Brands by name

Popular brands

Asus WL-106gM, User Manual

Search results

Summary of Contents for WL-106gM

Reviews:

Related manuals for WL-106gM

Brands by name

Popular brands