2-1
ASUS VW22AxL LCD Monitor
2.1
Assembling the monitor arm/base
To assemble the monitor base:
1. Have the front of the monitor face down on a table.
2. Rotate the arm anti-clockwise 90 degrees. (Figure 1)
3. Fix the base to the arm by fastening the bundled screw. (Figure 2) (Figure 3)
4. Align the arrow mark on the base with the two screws to allow 90 degrees swivel
from either left or right.
We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
2.2
Adjusting the monitor
• For optimal viewing, we recommend that you look at the full face of the
monitor, then adjust the monitor to the angle that is most comfortable for you.
• Hold the stand to prevent the monitor from falling when you change its angle.
• The recommended adjusting angle is
+15˚ to -5˚ (for tilt)/+45˚ to -45˚ (for swiveling/
+110 mm (for height adjustment)/90˚ (for portrait view)
.
It is normal that the monitor slightly shakes while you adjust the viewing angle.
Figure 1
Figure 2
Figure 3
Summary of Contents for VW22A L Series
Page 1: ...VW22AxL Series LCD Monitor User Guide ...
Page 16: ...2 4 Chapter 2 Setup ...
