2 - 9
2 - 9
2 - 9
2 - 9
2 - 9
A S U S V E N T O 7 7 0 0
A S U S V E N T O 7 7 0 0
A S U S V E N T O 7 7 0 0
A S U S V E N T O 7 7 0 0
A S U S V E N T O 7 7 0 0
2.5.2
2.5.2
2.5.2
2.5.2
2.5.2
Installing a Serial ATA hard disk drive
Installing a Serial ATA hard disk drive
Installing a Serial ATA hard disk drive
Installing a Serial ATA hard disk drive
Installing a Serial ATA hard disk drive
To install a S e r i a l A T A
S e r i a l A T A
S e r i a l A T A
S e r i a l A T A
S e r i a l A T A hard disk drive:
1.
Follow steps 1 to 4 of section “2.5.1 Installing an IDE hard disk drive.”
2.
Connect one end of the 7-pin
Serial ATA cable to the SATA
interface at the back of the
drive then connect the other
end to a SATA connector on
the motherboard.
Refer to the motherboard
user guide for the location
of the Serial ATA
connectors.
3.
Connect the 15-pin SATA power plug from the PSU to the power
connector at the back of the drive.
- O R -
- O R -
- O R -
- O R -
- O R -
Connect a 4-pin (female)
power plug from the power
supply unit (PSU) to the 4-pin
(male) power connector at the
back of the drive.
2
3
3
Use either the 15-pin Serial ATA power connector O R
O R
O R
O R
O R the legacy 4-pin
power connector. D O N O T
D O N O T
D O N O T
D O N O T
D O N O T use both to prevent damage to components
and to keep the system from becoming unstable.
