2-2
Chapter 2: Setup
2.3
Detaching the arm/base
(for VESA wall mount)
The detachable arm/base of this LED monitor is specially designed for VESA wall
mount.
To detach the arm/base:
1.
Have the front of the monitor face down on a table.
2.
Remove the rubbers in the four screw holes (Figure 1).
3.
Use a screwdriver to remove the two screws on the arm (Figure 2), then slide
out the arm/base to detach it from the monitor (Figure 2).
1
Rele
ase
Loc
k
Arm/base
Rubbers in the
screw holes
Figure 1
Figure 2
2
1
Rele
ase
Loc
k
We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
