Asus V4-M3A3200, User Manual

Page: 62 / 112

4-4 Chapter 4: Motherboard info
4.3 Connectors
1. Floppy disk drive connector (34-1 pin FLOPPY)
This connector is for the provided floppy disk drive (FDD) signal cable. Insert
one end of the cable to this connector, then connect the other end to the
signal connector at the back of the floppy disk drive.
Pin 5 on the connector is removed to prevent incorrect cable connection when
using an FDD cable with a covered Pin 5.
M3A78-EM
Floppy Disk Drive Connector
R
M3A78-EM
NOTE: Orient the red markings on
the floppy ribbon cable to PIN 1.
PIN1
FLOPPY
2. Serial port connector (10-1 pin COM1)
The connector is for a serial (COM) port. Connect the serial port module
cable to the connector, then install the module to a slot opening at the back of
the system chassis.
The serial port bracket (COM1) is purchased separately.
M3A78-EM COM Port Connector
R
M3A78-EM
PIN1
COM1