ASUS TUF GAMING X570-PLUS
1-15
Chapter 1
9.
Serial port connector (10-1 pin COM)
This connector is for a serial (COM) port. Connect the serial port module cable to this
connector, then install the module to a slot opening at the back of the system chassis.
The COM module is purchased separately.
TUF GAMING X570-PLUS Serial port (COM) connector
PIN 1
COM
DCD TXD GND RTS
RI
RXD DTR DSR CTS
8.
ATX power connectors (24-pin EATXPWR; 8-pin EATX12V; 4-pin EATX12V)
These connectors are for ATX power supply plugs. The power supply plugs are
designed to fit these connectors in only one orientation. Find the proper orientation and
push down firmly until the connectors completely fit.
TUF GAMING X570-PLUS ATX power connectors
A
EATX12V_1
EATX12V_2
+12V DC +12V DC +12V DC +12V DC
GND GND GND GND
EATXPWR
PIN 1
PIN 1
GND
+5 Volts
+5 Volts
+5 Volts
-5 Volts
GND
GND
GND
PSON#
GND
-12 Volts
+3 Volts
+3 Volts
+12 Volts
+12 Volts
+5V Standby
Power OK
GND
+5 Volts
GND
+5 Volts
GND
+3 Volts
+3 Volts
A
B
PIN 1
+DC_IN +DC_IN
GND GND
B
•
For a fully configured system, we recommend that you use a power supply unit
(PSU) that complies with ATX 12 V Specification 2.0 (or later version) and provides a
minimum power of 350 W.
•
We recommend that you use a PSU with a higher power output when configuring a
system with more power-consuming devices. The system may become unstable or
may not boot up if the power is inadequate.
•
If you want to use two or more high-end PCIe x16 cards, use a PSU with 1000W
power or above to ensure the system stability.
•
DO NOT connect the 4-pin power plug only, the motherboard may overheat under
heavy usage.
•
Ensure to connect the 8-pin power plug, or both the 8-pin and 4-pin power plugs.
