1-12
Chapter 1: Product Introduction
Chapter 1
5.
USB 3.2 Gen 1 connector (20-1 pin U32G1_12)
This connector allows you to connect a USB 3.2 Gen 1 module for additional USB
3.2 Gen 1 front or rear panel ports. With an installed USB 3.2 Gen 1 module, you can
enjoy all the benefits of USB 3.2 Gen 1 including faster data transfer speeds of up to
5 Gb/s, faster charging time for USB-chargeable devices, optimized power efficiency,
and backward compatibility with USB 2.0.
The USB 3.2 Gen 1 module is purchased separately.
The plugged USB 3.2 Gen 1 device may run on xHCI or EHCI mode depending on the
operating system’s setting.
TUF GAMING X570-PLUS USB 3.2 Gen 1 connector
PIN 1
Vbus
IntA_P1_SSRX-
IntA_
GND
IntA_P1_SSTX-
IntA_
GND
IntA_P1_D-
In
GND
Vbus
IntA_P2_SSRX-
IntA_
GND
IntA_P2_SSTX-
IntA_
GND
IntA_P2_D-
In
U32G1_12
Never connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!
4.
USB 2.0 connectors (10-1 pin USB78; USB910)
These connectors are for USB 2.0 ports. Connect the USB module cable to any of
these connectors, then install the module to a slot opening at the back of the system
chassis. These USB connectors comply with USB 2.0 specification that supports up to
480 Mb/s connection speed.
TUF GAMING X570-PLUS USB 2.0 connectors
USB+5V USB_P9- GND NC
USB+5V
USB_P10-
GND
USB78
PIN 1
USB+5V USB_P11- GND NC
USB+5V
USB_P12-
GND
USB910
PIN 1
