1-14
3.
Install your M.2 to your M.2 slot. The steps may differ between installing M.2 of
different lengths, please refer to the different types and their installation steps below:
•
To install an M.2 to M.2_3 slot
For 2280, 22110 length
A.
(optional) Remove the pre-installed removable M.2 Q-Latch screw at
the 2280 length screw hole.
Follow step A only when you wish to install an 22110 length M.2_3.
B.
(optional) Install the bundled M.2 rubber pad if you are installing a
single sided M.2 storage device. DO NOT install the bundled M.2
rubber pads when installing a double-sided M.2 storage device. The
rubber pad installed by default is compatible with double sided M.2
storage devices.
C.
Rotate and adjust the M.2 Q-latch so that the handle points away
from the M.2 slot.
D.
Install your M.2 to the M.2 slot.
E.
Rotate the M.2 Q-Latch clockwise to secure the M.2 in place.
OPTIONAL
Chapter 1: Product Introduction
