Asus TS700-E9 Series User Manual Download Page 110

Page: 110 / 178

5-18

Chapter 5: BIOS Setup

5.12

Boot menu

The Boot menu items allow you to change the system boot options.

Boot Option Priorities

These items specify the boot device priority sequence from the available devices. The

number of device items that appears on the screen depends on the number of devices

installed in the system.

•

To select the boot device during system startup, press <F8> when ASUS Logo

appears.

•

To access Windows OS in Safe Mode, please press <F8> after POST.

Network Device BBS Priorities

This item allows you to set the booting from network.

Hard Drive BBS Priorities

These items appear only when you connect SATA ODD or hard drive to the SATA ports and

allow you to set the booting order of the SATA devices.

Summary of Contents for TS700-E9 Series



















































































































































































Search results

Summary of Contents for TS700-E9 Series

Reviews:

Related manuals for TS700-E9 Series

Brands by name

Popular brands

Asus TS700-E9 Series, User Manual

Search results

Summary of Contents for TS700-E9 Series

Reviews:

Related manuals for TS700-E9 Series

Brands by name

Popular brands