manualshive.com logo in svg

Asus TS700-E6/RS8, User Manual

Share
Download
Asus TS700-E6/RS8 User Manual Download Page 27

2-7

ASUS TS700-E6/RS8

2.2.2 

Installing the CPU heatsink and fan

To install the CPU heatsink and fan:
1.  Place the CPU heatsink and fan on 

top of the installed CPU, ensuring 

that the four screws match the holes 

on the support plate, and the arrow 

on the fan faces to rear panel of the 

server chassis.

2.  Twist each of the four screws with 

a Philips (cross) screwdriver just 

enough to attach the CPU heatsink 

and fan to the motherboard. When 

the four screws are attached, 

tighten them one by one to 

completely secure the CPU 

heatsink and fan.

3.  Connect the CPU heatsink and 

fan cable to the connector on the 

motherboard.

Do not forget to connect 

the CPU heatsink and fan 

connector! Hardware monitoring 

errors can occur if you fail to 

plug this connector.

Summary of Contents for TS700-E6/RS8







































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands