background image

Chapter 2:  Hardware setup

2-6

The CPU fits in only one correct 

orientation. DO NOT force the 

CPU into the socket to prevent 

bending the connectors on the 

socket and damaging the CPU!

6.  Position the CPU over the socket, 

ensuring that the gold triangle is on 

the bottom-left corner of the socket, 

and then fit the socket alignment key 

into the CPU notch.

Gold 

triangle 

mark

Alignment key

CPU notch

B

8.  Close the load plate (A), and then 

push the load lever (B) until it snaps 

into the retention tab.

A

7.  Apply several drops of thermal paste 

to the exposed area of the CPU that 

the heatsink will be in contact with, 

ensuring that it is spread in an even 

thin layer.

Some heatsinks come with pre-

applied thermal paste. If so, skip 

this step.

The thermal paste is toxic and 

inedible. If it gets into your eyes 

or touches your skin, ensure to 

wash it off immediately and seek 

professional medical help.

To prevent contaminating the paste, DO NOT spread the paste with your finger 

directly.

Summary of Contents for TS700-E6/RS8







































































































































































Reviews: