Asus TS110-E8-PI4, User Manual

Page: 84 / 146

4-28 Chapter 4: BIOS setup
4.4.16 APM
Allows you to configure the Advance Power Management (APM) settings.
Restore AC Power Loss [Last State]
Allows you to set the state the system will go to after an AC power loss. Configuration
options: [Power Off] [Power On] [Last State]
Power On By PCI [Disabled]
You can use this option to enable or disable the Wake-on-LAN feature of the Intel
®
LAN.
Configuration options: [Disabled] [Enabled]
Power On By PCIE [Disabled]
This allows you to enable or diasble the PCIE devices to generate a wake event.
Configuration options: [Disabled] [Enabled]
Power On By RTC [Disabled]
This item allows you to enable or disable RTC to generate a wake event. When set to
[Enabled], the items RTC Alarm Date (Days) and Hour/Minute/Second becomes user-
configurable where you can set values.
EUP Ready [Disabled]
This item allows you to switch off some power at S5 to get the system ready for EuP
requirement. Configuration options: [Enabled] [Disabled]
4.4.15 Runtime Error Logging Support
Aptio Setup Utility - Copyright (C) 2014 American Megatrends, Inc.
Advanced
Runtime Error Logging Support [Disabled]
Aptio Setup Utility - Copyright (C) 2014 American Megatrends, Inc.
Advanced
Restore AC Power Loss [Last State]
Power On By PCI [Disabled]
Power On By PCIE [Disabled]
Power On By RTC [Disabled]
EuP Ready [Disabled]
Specify what state to
go to when power is re-
applied after a power
failure (G3 state).
Runtime Error Logging Support [Disabled]
Allows you to enable or disable the Runtime Error Logging Support. Configuration options:
[Disabled] [Enabled]