6
2.2
Setting up using a microSD card
You may use a mircoSD card to set up your Tinker Board OS. Please refer to the steps
below.
1. Write the downloaded OS image to a microSD card using a third-party ISO
software, such as
Etcher
or
Win32DiskImager
. You may refer to the
Writing the
OS image
section of this manual for more information on writing the OS image.
• Etcher is supported on Windows
®
, Mac, and Linux.
• Please refer to
http://etcher.io/ for more information on
Etcher
.
• Please refer to
http://sourceforge.net for more information on
Win32DiskImager
.
2. Insert the microSD card to your Tinker Board.
Please refer to your Tinker Board product manual for the location of the microSD slot.
3. Connect your Tinker Board to a power source using the bundled adapter to boot
your Tinker Board.
Summary of Contents for Tinker Board Series
Page 1: ...Tinker Board Series User Manual ...
Page 12: ......
