2-6
Chapter 2: Basic installation
4. Lift the load plate with your
thumb and forefinger to a 100º
angle (4A), then push the PnP
cap from the load plate window
to remove (4B).
3. Lift the load lever in the
direction of the arrow to a 135º
angle.
Load plate
PnP cap
4A
4B
3
5. Position the CPU over the
socket, making sure that
the gold triangle is on the
bottom-left corner of the socket
then fit the socket alignment
key into the CPU notch.
Gold
triangle
mark
Alignment key
CPU notch
6. Close the load plate (A), then
push the load lever (B) until it
snaps into the retention tab.
A
B
