Asus SpaceLink WL230 User Manual Download

Page: 110 / 122

BTW Configuration & User’s Guide

Configuration Panel

April 5, 2002

WIDCOMM

5.4.1 Hardware Advanced Settings Dialog Box

When available, this dialog box is reached from the Hardware tab of the Bluetooth
Configuration Panel.

Depending on the country in which the hardware is sold and/or in which it will be used,
the Advanced button may not be present.

From this dialog box you can set the:

•

Country Code:

North America, Europe (except France), and Japan

France and China

•

Maximum Transmission Power:

High

Medium

Low.

Click the Apply button to implement the changes. A dialog box appears with notification
that the Bluetooth device attached to this computer must be reset before the change(s)
will take effect.

Click the Yes button to reset the Bluetooth device now—

all open Bluetooth connections

will be closed

Click the No button to save the changes—the changes will be applied the next time the
Bluetooth device is reset or restarted.

Summary of Contents for SpaceLink WL230



























































































































Search results

Summary of Contents for SpaceLink WL230

Reviews:

Related manuals for SpaceLink WL230

Brands by name

Popular brands

Asus SpaceLink WL230, User Manual

Search results

Summary of Contents for SpaceLink WL230

Reviews:

Related manuals for SpaceLink WL230

Brands by name

Popular brands