Asus RT-AX3000 User Manual Download

Page: 48 / 136

To set up 3G/4G internet access:

1. From the navigation panel, click

General

USB application

3G/4G

2. In the

Enable USB Modem

field, select

Yes

3. Set up the following:

•

Location:

Select your 3G/4G service provider’s location from

the dropdown list.

•

ISP

: Select your Internet Service Provider (ISP) from the

dropdown list.

•

APN (Access Point Name) service (optional)

: Contact your

3G/4G service provider for detailed information.

•

Dial Number and PIN code

: The 3G/4G provider’s access

number and PIN code for connection.

NOTE:

PIN code may vary from different providers.

•

Username / Password:

The

username and password will be

provided by the 3G/4G network carrier.

•

USB Adapter

: Choose your USB 3G / 4G adapter from the

dropdown list. If you are not sure of your USB adapter’s

model or the model is not listed in the options, select

Auto

Click

Apply

NOTE:

The router will reboot for the settings to take effect.

Summary of Contents for RT-AX3000









































































































































Search results

Summary of Contents for RT-AX3000

Reviews:

Related manuals for RT-AX3000

Brands by name

Popular brands

Asus RT-AX3000, User Manual

Search results

Summary of Contents for RT-AX3000

Reviews:

Related manuals for RT-AX3000

Brands by name

Popular brands