Asus RT-AC86U Page 88 User Manual Download

Page: 88 / 140

To set up a Network Service filter:

1. From the navigation panel, go to

Advanced Settings

Firewall

Network Service Filter

tab.

2. On the

Enable Network Services Filter

field, select

Yes

3. Select the Filter table type.

Black List

blocks the specified

network services.

White List

limits access to only the specified

network services.

4. Specify the day and time when the filters will be active.
5. To specify a Network Service to filter, enter the Source IP,

Destination IP, Port Range, and Protocol. Click the

button.

6. Click

Apply

4.6.5 IPv6 Firewall

By default, your ASUS wireless router blocks all unsolicited
incoming traffic. The IPv6 Firewall function allows incoming traffic
coming from specified services to go through your network.

Summary of Contents for RT-AC86U













































































































































Search results

Summary of Contents for RT-AC86U

Reviews:

Related manuals for RT-AC86U

Brands by name

Popular brands

Asus RT-AC86U, User Manual

Search results

Summary of Contents for RT-AC86U

Reviews:

Related manuals for RT-AC86U

Brands by name

Popular brands