Asus RT-AC1200G User Manual Download Page 41

Page: 41 / 104

4.1.3 Wireless MAC Filter

Wireless MAC filter provides control over packets transmitted to

a specified MAC (Media Access Control) address on your wireless

network.

To set up the Wireless MAC filter:

1. From the navigation panel, go to

Advanced Settings

Wireless

Wireless MAC Filter

tab.

2. In the

Frequency

field, select the frequency band that you

want to use for the Wireless MAC filter.

3. In the

MAC Filter Mode

dropdown list, select either

Accept

Reject

• Select

Accept

to allow devices in the MAC filter list to access

to the wireless network.

• Select

Reject

to prevent devices in the MAC filter list to

access to the wireless network.

4. On the MAC filter list, click the

Add

button and key in the

MAC address of the wireless device.

5. Click

Apply

Summary of Contents for RT-AC1200G









































































































Search results

Summary of Contents for RT-AC1200G

Reviews:

Related manuals for RT-AC1200G

Brands by name

Popular brands

Asus RT-AC1200G, User Manual

Search results

Summary of Contents for RT-AC1200G

Reviews:

Related manuals for RT-AC1200G

Brands by name

Popular brands