Asus RS720Q-E9-RS24-S User Manual Download

Page: 18 / 150

Chapter 1: Product Introduction

1-6

Refer to the

Front panel LEDs

section for the LED descriptions.

Turn off the system power and detach the power supply before removing or replacing any

system component.

Asset tag

The Asset tag is a small polyester film located to the right side of the server’s front right panel.

It provides information about the server such as asset barcode or serial number and is useful

in asset tracking and inventory management.

1.4

Front panel features

Front panel

Node 2

The barebone server displays easily accessible features such as the power and reset

buttons, LED indicators, and optical drive.

Front panel

Node 1

Asset tag

Front panel

Node 4

Front panel

Node 3

Node 1

(Bay 1-6)

Node 2

(Bay 7-12)

Node 3

(Bay 13-18)

Node 4

(Bay 19-24)

Summary of Contents for RS720Q-E9-RS24-S























































































































































Search results

Summary of Contents for RS720Q-E9-RS24-S

Reviews:

Related manuals for RS720Q-E9-RS24-S

Brands by name

Popular brands

Asus RS720Q-E9-RS24-S, User Manual

Search results

Summary of Contents for RS720Q-E9-RS24-S

Reviews:

Related manuals for RS720Q-E9-RS24-S

Brands by name

Popular brands