Asus RS720A-E9-RS12V2 User Manual Download Page 148

Page: 148 / 160

6-6

Chapter 6: Driver Installation

5. Click

Install Drivers and Software

option to begin installation.

6.4

Installing the Intel

I350-AM2 Gigabit Adapters

driver

This section provides the instructions on how to install the

Intel

I350-AM2 Gigabits Adapter

Driver

on the system.

To install the

Intel

I350-AM2 Gigabi

Adapters Driver

on the Windows

operating system:

Restart the computer.

Log on with

Administrator

privileges.

Insert the motherboard/system support DVD to the optical drive.

If Autorun is NOT enabled in your computer, browse the contents of the support DVD to

locate the file

ASSETUP.EXE

from the

BIN

folder. Double-click the

ASSETUP.EXE

to run

the support DVD.

4. Click

Intel

I350-AM2 Gigabit Adapters Drivers

in the

Drivers

menu of the main

screen to start the installation.

Summary of Contents for RS720A-E9-RS12V2

































































































































































Search results

Summary of Contents for RS720A-E9-RS12V2

Reviews:

Brands by name

Popular brands

Asus RS720A-E9-RS12V2, User Manual

Search results

Summary of Contents for RS720A-E9-RS12V2

Reviews:

Brands by name

Popular brands