Asus RS720A-E9-RS12V2, User Manual

Page: 131 / 160

5-41 ASUS RS720A-E9-RS12V2
Pattern Select [PRBS]
Configuration options: [PRBS] [SS0] [Both]
Pattern Length [3]
This token helps to determine the pattern length. The possible options are
N=3...12.
Configuration options: [3] – [9]
Aggressor Channel [1 Aggressor Channel]
This helps read the aggressors channels. If set to [Enabled] , you can
read from one or more than one aggressor channel. The default is set to
[Disabled] .
Configuration options: [Disabled] [1 Aggressor Channel] [3 Aggressor
Channels] [7 Aggressor Channels]
Aggressor Static Lane Select Upper 32 bits [0]
Static Lane Select for Upper 32 bits. The bit mask represents the bits to be
read.
Configuration options: [0] – [99999999]
Aggressor Static Lane Select Lower 32 bits [0]
Static Lane Select for Lower 32 bits. The bit mask represents the bits to be
read.
Configuration options: [0] – [99999999]
Aggressor Static Lane Select ECC [0]
Static Lane Select for ECC Lanes. The bit mask represents the bits to be
read.
Configuration options: [0] – [9]
Aggressor Static Lane Value [0]
Configuration options: [0] – [9]
Target Static Lane Control [Disabled]
Configuration options: [Disabled] [Enabled]
The following items appear only when
Target Static Lane Control
is set to
[Enabled]
.
Target Static Lane Select Upper 32 bits [0]
Static Lane Select for Upper 32 bits. The bit mask represents the bits to be
read.
Configuration options: [0] – [99999999]
Target Static Lane Select Lower 32 bits [0]
Static Lane Select for Lower 32 bits. The bit mask represents the bits to be
read.
Configuration options: [0] – [99999999]
Target Static Lane Select ECC [0]
Static Lane Select for ECC Lanes. The bit mask represents the bits to be
read.
Configuration options: [0] – [9]
Target Static Lane Value [0]
Configuration options: [0] – [9]
Data Eye Type [Worst Case Margin Only]
This option determines which results are expected to be captured for Data
Eye. Supported options are 1D Voltage Sweep, 1D Timing Sweep, 2D Full
Data Eye and Worst Case Margin only.
Configuration options: [1D Voltage Sweep] [1D Timing Sweep] [2D Full
Data Eye]