Asus RS520-E9-RS12-E User Manual Download Page 56

Page: 56 / 178

Chapter 2: Hardware Information

2-28

2.8.1

System fans

To uninstall the system fans:

Hold two levers on both sides of the fan, then lift the fan to remove.

Repeat steps 1 to uninstall the other system fans.

To reinstall the system fans

Insert the fan into the fan cage. The

airflow directional arrow on the fan side

should point towards the CPU heatsink.

2.8

Removable/optional components

This section explains how to install optional components into the system and covers the

following components:

System fans

Slim type optical drive (optional)

Redundant power supply module (optional)

Ensure that the system is turned off before removing any components.

Summary of Contents for RS520-E9-RS12-E



















































































































































































Search results

Summary of Contents for RS520-E9-RS12-E

Reviews:

Related manuals for RS520-E9-RS12-E

Brands by name

Popular brands

Asus RS520-E9-RS12-E, User Manual

Search results

Summary of Contents for RS520-E9-RS12-E

Reviews:

Related manuals for RS520-E9-RS12-E

Brands by name

Popular brands