Asus RS520-E9-RS12-E User Manual Download Page 166

Page: 166 / 178

7-12

Chapter 7: Driver Installation

5. Click

Install Drivers and Software

option to begin installation.

7.6

Installing the Intel

I350-AM2 Gigabit Adapters

driver

This section provides the instructions on how to install the

Intel

I350-AM2 Gigabits Adapter

Driver

on the system.

To install the

Intel

I350-AM2 Gigabi

Adapters Driver

on the Windows

operating system:

Restart the computer.

Log on with

Administrator

privileges.

Insert the motherboard/system support DVD to the optical drive.

If Autorun is NOT enabled in your computer, browse the contents of the support DVD to

locate the file

Setup.exe

. Double-click the

Setup.exe

to run the support DVD.

4. Click

Intel

I350-AM2 Gigabit Adapters Drivers

in the

Drivers

menu of the main

screen to start the installation.

Summary of Contents for RS520-E9-RS12-E



















































































































































































Search results

Summary of Contents for RS520-E9-RS12-E

Reviews:

Related manuals for RS520-E9-RS12-E

Brands by name

Popular brands

Asus RS520-E9-RS12-E, User Manual

Search results

Summary of Contents for RS520-E9-RS12-E

Reviews:

Related manuals for RS520-E9-RS12-E

Brands by name

Popular brands