manualshive.com logo in svg

Asus RS500A-E9 SERIES, User Manual, Page: 44 / 130

Share
Download
Asus RS500A-E9 SERIES User Manual Download Page 44

Chapter 2: Hardware Information

2-26

2.8 

Removable/optional components

You may need to remove previously installed system components when installing or removing 

system devices. Or you may need to install the optional components into the system. This 

section tells how to remove/install the system fans:

Ensure that the system is turned off before removing any components from your system. 

2.8.1 

System fans

To uninstall the system fans:

1. 

Disconnect the system fan cable from the fan connector on the motherboard.

2. 

Lift the fan, then set aside.

3. 

Repeat steps 1 to 2 to uninstall the other system fans.

To reinstall the system fans

1. 

Insert the fan to the fan cage. The airflow directional arrow on the fan side should point 

towards the system rear panel.

2. 

Connect the system fan cable to the fan connector on the motherboard.

Summary of Contents for RS500A-E9 SERIES



































































































































Reviews:

No comments