Asus RS300-E8 Series User Manual Download Page 17

Page: 17 / 160

ASUS RS300-E8 Series

1-7

1.5

Rear panel features

The rear panel includes the expansion slots, system power sockets, and rear fans. The I/O

shields with openings for the rear panel connectors on the motherboard are also placed in the

real panel.

The ports for the USB, VGA, and Gigabit LANs do not appear on the rear panel if the

motherboards are not present.

VGA port

USB 3.0 ports

LAN port 5*

PS/2 keyboard/mouse port

Gigabit LAN port 3

Gigabit LAN port 4

Gigabit LAN port 1

Gigabit LAN port 2

USB 2.0 ports

This port is for ASUS ASMB7-iKVM controller card only.

VGA port

USB 3.0 ports

LAN port 5*

PS/2 keyboard/mouse port

Gigabit LAN port 3

Gigabit LAN port 4

Gigabit LAN port 1

Gigabit LAN port 2

USB 2.0 ports

RS300-E8-RS4

RS300-E8-PS4

Summary of Contents for RS300-E8 Series

































































































































































Search results

Summary of Contents for RS300-E8 Series

Reviews:

Related manuals for RS300-E8 Series

Brands by name

Popular brands

Asus RS300-E8 Series, User Manual

Search results

Summary of Contents for RS300-E8 Series

Reviews:

Related manuals for RS300-E8 Series

Brands by name

Popular brands