Asus RS260-E4 RX8 Service Manual Download

Page: 174 / 182

7-24

Chapter 7: Driver installation

7.5

Management applications and utilities

installation

The support CD that came with the motherboard package contains the drivers,

management applications, and utilities that you can install to avail all motherboard

features.

The contents of the support CD are subject to change at any time without notice.

Visit the ASUS website (www.asus.com) for updates.

7.5.1

Running the support CD

Place the support CD to the optical drive. The CD automatically displays the

Drivers menu if Autorun is enabled in your computer.

If Autorun is NOT enabled in your computer, browse the contents of the support

CD to locate the file ASSETUP.EXE from the BIN folder. Double-click the

ASSETUP.EXE to run the CD.

7.5.2

Drivers menu

The Drivers menu shows the available device drivers if the system detects installed

devices. Install the necessary drivers to activate the devices.

The screen display and driver options vary under different operating system

versions.

Intel(R) Chipset Software Installation Utility

Intel(R) PRO/1000 EB Network Connection

ASF

ATI ES1000

LSI 1068 SAS utility

LSI 1068 SAS Controller (Win2K/Win2K3 32 bit)

LSI 1068 SAS Controller (Win2K3 64 bit)

Summary of Contents for RS260-E4 RX8























































































































































































Search results

Summary of Contents for RS260-E4 RX8

Reviews:

Related manuals for RS260-E4 RX8

Brands by name

Popular brands

Asus RS260-E4 RX8, Service Manual

Search results

Summary of Contents for RS260-E4 RX8

Reviews:

Related manuals for RS260-E4 RX8

Brands by name

Popular brands