A S U S R S 1 2 0 - E 3 ( P A 2 )
A S U S R S 1 2 0 - E 3 ( P A 2 )
A S U S R S 1 2 0 - E 3 ( P A 2 )
A S U S R S 1 2 0 - E 3 ( P A 2 )
A S U S R S 1 2 0 - E 3 ( P A 2 )
6 - 2 7
6 - 2 7
6 - 2 7
6 - 2 7
6 - 2 7
Using the Objects command
Using the Objects command
Using the Objects command
Using the Objects command
Using the Objects command
To check data consistency using the O b j e c t s
O b j e c t s
O b j e c t s
O b j e c t s
O b j e c t s command:
1.
From the Management Menu, select O b j e c t s
O b j e c t s
O b j e c t s
O b j e c t s
O b j e c t s, then select L o g i c a l
L o g i c a l
L o g i c a l
L o g i c a l
L o g i c a l
D r i v e
D r i v e
D r i v e
D r i v e
D r i v e from the menu.
2.
Use the arrow keys to select the logical drive you want to check, then
press <Enter>.
3.
Select Check Consistency
Check Consistency
Check Consistency
Check Consistency
Check Consistency from the pop-up menu, then press <Enter>.
4.
When prompted, press <Y> to to check the drive.
5.
When checking is complete, press any key to continue.
