Gv J. v. Stolbergln 31 - A3850
2263AB Leidschendam
The Netherlands
Measurements
The reduced pulse frequency of the beacon signal in the Eco-wifi routers has
been measured by EMF Consult Norway. The oscilloscope images below
show the measured electromagnetic emission versus time, on a
200 milliseconds x-axis scale:
Ordinary wifi router with 10 beacon
Eco-wifi router with 1 beacon
pulses/sec.
pulse/sec.
In addition, the Eco 100 router offers an automatic full switch-off of the beacon
signal, as already explained in this manual.
Reducing the strength of the pulses
While the average pulse strength of the Eco-wifi beacon signals is 10 times
reduced, because of the reduced pulse rate as explained above, the peak
pulse strength in the default setting is similar as with ordinary routers. This is
because transmission power is inextricably linked to the range of the router, a
physical fact that, unfortunately, cannot changed.
You can reduce the transmit power by adjusting its setting. The Eco-wifi offers
fine adjustment of the range with a 1 milliwatt step size. The router is shipped
with a standard setting of 30mW (42mW for 5 GHz) which can be lowered to
4mW. See ‘Tx power adjustment’ earlier in this manual. See 9.1 ("Tx power
adjustment") earlier in this manual.
32
Copyright 2020 JRS Eco Wireless – ECO-100 V5
n
e
_
m
0
0
1
e
