Gv J. v. Stolbergln 31 - A3850
2263AB Leidschendam
The Netherlands
12.2. The router does not wake up from Full Eco standby mode when I
turn on wifi on my wireless device
If the wifi network doesn't appear on your wireless device when the Eco 100
router is in Full Eco standby, connect it to hidden (Other) network
jrs
or
jrs5
.
See also 4.Connecting your wireless devices to the router.
12.3. I cannot connect to the wireless network
•
If the wifi network isn’t listed in the list of available networks or your
device keeps displaying 'connecting to network', cancel the connection,
and then reconnect. Alternatively you can switch on the wifi on the
device (using e.g. the wifi slider on your phone), wait 5 seconds, then
switch its wifi off and on again.
•
There could be a problem with the settings on your wifi device
(laptop/mobile phone), for example the wrong type of security setting
has been selected or the wrong password has been typed in. Try to use
'forget network' or similar so that you can enter the settings/password
again.
•
The reduced pulse frequency of the Eco-wifi may not be compatible with
your wireless device. This especially happens with the 5GHz
connections. In this case you can lower the Beacon Interval setting on
the JRS settings tab. This will increase the pulse frequency. See also
9.1.
•
You may decide to lock the router into Beacon Eco mode, or set it in
Legacy Eco-wifi mode. These modes may offer better compatibility with
your wireless devices while still reducing wifi emissions considerably.
12.4. My devices cannot find the Eco-wifi network, connection keeps
dropping or is slow
When other wifi networks are in the area, for example neighboring wireless
routers or other wireless transmitters working on the same wifi frequency as
the Eco-wifi router, interference may occur which causes these problems. Also
if the built-in wifi of your Internet modem is not turned off, and that includes the
public wifi network or wifispots it may be transmitting, these can interfere
heavily with the Eco-wifi signal.
In most cases the solution for connection problems is to set the Eco-wifi router
to another channel. It is best to set the router to a fixed channel instead of to
Auto. To find the best channel you may follow this procedure:
26
Copyright 2020 JRS Eco Wireless – ECO-100 V5
