Asus Rampage IV Formula User Manual Download Page 129

Page: 129 / 174

ROG RAMPAGE IV FORMULA

3-51

Chapter 3

3.10.5

USB BIOS Flashback

The USB BIOS Flashback allows user to update the BIOS without entering the BIOS or the

operating system by using a USB flash disk drive under standby power.

Download the latest BIOS file from the ASUS website

Extract and rename the BIOS image file to

“R4F.ROM”

Copy

“R4F.ROM”

to the root directory of the USB flash disk drive

Turn off the system and connect the

USB flash drive to the

ROG Connect

port

(the white USB 2.0 port) at the rear

panel of the motherboard

Hold the

ROG Connect button

until the

LED begins to blink, then release

Wait until the LED stops to blink, then

the BIOS flash will be completed.

•

This function can support devices such as a USB flash disk with FAT 32/16

format and single partition only.

•

DO NOT unplug the power of the system while updating the BIOS to

prevent system boot failure!

Summary of Contents for Rampage IV Formula















































































































































































Search results

Summary of Contents for Rampage IV Formula

Reviews:

Related manuals for Rampage IV Formula

Brands by name

Popular brands

Asus Rampage IV Formula, User Manual

Search results

Summary of Contents for Rampage IV Formula

Reviews:

Related manuals for Rampage IV Formula

Brands by name

Popular brands