Asus Q170T, User Manual

Page: 14 / 28

ASUS Q170T
1-5
When using PCI cards on shared slots, ensure that the drivers support “Share IRQ” or that
the cards do not need IRQ assignments. Otherwise, conflicts will arise between the two PCI
groups, making the system unstable and the card inoperable.
IRQ assignments for this motherboard
A B C D E F G H
HD Audio controller shared – – – – – – –
XHCI shared – – – – – – –
SATA controller shared – – – – – – –
Realtek LAN controller – shared – – – – – –
Intel LAN controller shared – – – – – – –
M.2 shared – – – – – – –
IGD shared – – – – – – –
WLAN – – – shared – – – –
25
RTC Battery header (2-pin BATT_CON)
This connector is for the lithium CMOS battery.
26
M.2 WIFI
This socket connects to an M.2 WI-FI device. Use the bundled screw 3020-
01810100 to secure your M.2 device.
27
Serial port connector (10-1 pin COM)
Connect the serial port module cable to this connector, then install the module to a
slot opening at the back of the system chassis.