2 - 4
2 - 4
2 - 4
2 - 4
2 - 4
C h a p t e r 2 : B a s i c i n s t a l l a t i o n
C h a p t e r 2 : B a s i c i n s t a l l a t i o n
C h a p t e r 2 : B a s i c i n s t a l l a t i o n
C h a p t e r 2 : B a s i c i n s t a l l a t i o n
C h a p t e r 2 : B a s i c i n s t a l l a t i o n
2.3.2
2.3.2
2.3.2
2.3.2
2.3.2
Removing the front panel assembly
Removing the front panel assembly
Removing the front panel assembly
Removing the front panel assembly
Removing the front panel assembly
To remove the front panel assembly:
1.
Place the system vertically.
2.
Locate the front panel assembly hooks.
3.
Pull the hooks outward to release the front panel assembly.
4.
Swing the left edge of the front panel assembly outward.
5.
Unhook the hinge-like tabs from the holes on the right side of the
chassis to detach.
Do not use too much force when removing the front panel assembly.
H i n g e - l i k e t a b
H i n g e - l i k e t a b
H i n g e - l i k e t a b
H i n g e - l i k e t a b
H i n g e - l i k e t a b
Summary of Contents for Pundit-PH3
Page 1: ...Pundit PH3 Barebone System ...
Page 50: ......