vii
ProArt Z490-CREATOR 10G specifications summary
Storage
Total supports 2 x M.2 slots and 6 x SATA 6Gb/s ports
Intel
®
Z490 Chipset
M.2_1 slot (Key M), type 2242/2260/2280/22110
(supports PCIe 3.0 x4 & SATA modes)*
M.2_2 slot (Key M), type 2242/2260/2280/22110
(supports PCIe 3.0 x4 mode)**
6 x SATA 6Gb/s ports
Intel
®
Rapid Storage Technology supports Raid 0,1,5,10
Intel
®
Optane™ Memory Ready
* When M.2_1 is operating in SATA mode, SATA6G_2 will be disabled.
** M.2_2 runs at PCIe 3.0 x2 by default and shares bandwidth with SATA6G_56.
When M.2_2 runs at PCIe 3.0 x4 or is populated by H10, SATA6G_56 will be
disabled.
Ethernet
1 x Intel
®
I225-V Ethernet
USB
Rear USB (Total 8 ports)
2 x USB 3.2 Gen 2 ports (2 x USB Type-C
®
) from Intel
®
Thunderbolt™
3 Controller
4 x USB 3.2 Gen 2 ports (4 x Type-A)
2 x USB 3.2 Gen 1 ports (2 x Type-A)
Front USB (Total 7 ports)
1 x USB 3.2 Gen 1 front panel connector (supports USB Type-C
®
)
1 x USB 3.2 Gen 1 header supports additional 2 USB 3.2 Gen 1 ports
2 x USB 2.0 headers support additional 4 USB 2.0 ports
Audio
Realtek
®
S1220A 8-Channel High Definition Audio CODEC
- Impedance sense for front and rear headphone outputs
- I nternal audio Amplifier to enhance the highest quality sound for
headphone and speakers
- Supports : Jack-detection, Multi-streaming, Front Panel Jack-retasking
- High quality 120 dB SNR stereo playback output and 113 dB SNR
recording input (Line-in)
- Supports up to 32-Bit/192kHz playback*
Audio Features:
- Power pre-regulator reduces power input noise to ensure consistent
performance
- Rear optical S/PDIF out port
- Premium Japanese audio capacitors
- Audio Shielding
- Dedicated audio PCB layers
- Audio cover
- Unique de-pop circuit
* Due to limitations in HDA bandwidth, 32-Bit/192kHz is not supported for
8-Channel audio.
(continued on the next page)
Summary of Contents for ProArt Z490-CREATOR 10G
