background image

3-10

Chapter 3: OSD (On-Screen Display) menu 

FreeSync Premium Pro

 can only be activated within 48Hz~120Hz 

(DisplayPort, USB Type C). 

VRR

 can only be activated within 48Hz ~100Hz (HDMI). 

* For supported GPUs, minimum PC system and driver requirements, please 

contact the GPU manufactures. 

To activate this function, you need to do the following: turn off 

PIP/PBP

set 

Aspect Control

 to 

Full

, set 

DisplayPort Stream

 to 

DisplayPort 1.2

 or 

DisplayPort 1.4

.

• 

Dynamic Dimming

: Synchronizes with contents while contrast 

changing to execute backlight dynamic dimming. You can adjust the 

synchronization speed as “

Fast

”, “

Medium

” or “

Gradual

”.

To activate this function, you need to do the following: turn off 

PIP/PBP

 and 

Rapid Rendering Mode

.

• 

USB Setup

: Configures the USB Type C port setting. The USB Setup 

parameter affects the output resolution only when the source is connected 

to the USB Type C port. Due to the technological differences between 

USB 2.0 and USB 3.1, THE maximum USB data throughput (bandwidth 

and other related characteristics) varies and therefore influences the 

maximum output resolution.

USB 3.1

: The data transfer rate according to the 3.1 specification 

in USB Type C port only have Two lanes for Main Link.

USB 2.0

: The data transfer rate according to the 2.0 specification 

in USB Type C port only have Four lanes for Main Link.

The data transfer rate will remain USB 3.1 when using USB Type C to A cable.

The USB Setup setting does not affect the resolution if the source is connected 

to the DisplayPort or HDMI port.

• 

Power Level

: Select 

Normal Level

 for power on hub during power 

saving. Select 

Deep Level

 for power off hub during power saving.

• 

OSD Setup

Adjusts the OSD timeout from 10 to 120 seconds. 

Enables or disables the DDC/CI function.

Adjusts the OSD background from opaque to transparent.

• 

DisplayPort Stream

: Compatibility with graphic card. Select 

DisplayPort 

1.1, DisplayPort 1.2

 or 

DisplayPort 1.4

 by graphic card DP version.

To activate this function, you need to do the following: turn off 

FreeSync 

Premium Pro/VRR

.

Summary of Contents for ProArt PA348CGV Series






































Reviews: