Asus PRIME Z270-A Series User Manual Download Page 33

Page: 33 / 104

ASUS TUF Z270 MARK 1

1-17

Chapter 1

DO NOT connect a 1394 cable to the USB connectors. Doing so will damage the

motherboard!

The USB 2.0 module is purchased separately.

USB 2.0 connectors (10-1 pin USB1314; USB1112)

These connectors are for USB 2.0 ports. Connect the USB module cable to these

connectors, then install the module to a slot opening at the back of the system chassis.

This USB connector complies with USB 2.0 specification that supports up to 480 Mb/s

connection speed.

Thunderbolt header (5-pin TB_HEADER)

This connector is for the add-on Thunderbolt I/O card that supports Intel’s Thunderbolt

Technology, allowing you to connect up to six Thunderbolt-enabled devices and a

DisplayPort-enabled display in a daisy-chain configuration.

The add-on Thunderbolt I/O card and Thunderbolt cables are purchased separately.

Summary of Contents for PRIME Z270-A Series









































































































Search results

Summary of Contents for PRIME Z270-A Series

Reviews:

Related manuals for PRIME Z270-A Series

Brands by name

Popular brands

Asus PRIME Z270-A Series, User Manual

Search results

Summary of Contents for PRIME Z270-A Series

Reviews:

Related manuals for PRIME Z270-A Series

Brands by name

Popular brands