English
LEDs and buttons
LED
STATUS
DESCRIPTION
2.4G /5G
Wi-Fi
Blinking
rapidly
Your PL-AC56 is cloning the parent
AP’s SSID and password.
Blinking every
second
Your PL-AC56 is resetting to the
factory default settings.
Powerline On
The device is connected to one or
more powerline devices.
Off
The device is not connected to any
powerline devices.
Blinking
In Power-Saving mode, the power-
line LED blinks every 15 seconds.
Ethernet
On/Off
A device is connected or not con-
nected to the Ethernet port.
Blinking
The powerline adapter is transfer-
ring data via the Ethernet port.
Power
On/Off
Your device is on/off.
When switched on, the power LED
turns from red to green in about
one minute, indicating that it is
ready to use.
Blinking
Blinking every second: Pairing is in
progress.
BUTTON
DESCRIPTION
Clone
Press and hold the button for about one second to start
cloning the parent AP’s SSID and password.
Pair
Press and hold the button for about one second to start
the pairing process.
Reset
Press and hold the button for about five seconds to restore
your device to the factory default settings.
U11264_PL-AC56_Kit_QSG_Booklet_105x170mm.indb 4
2016-02-04 10:04:49
