ASUS PIKE 9230
3-9
4. Use the up or down arrow key to move the selection bar and press <Enter> to
configure further RAID settings.
RAID Level:
Select a RAID Level. Configuration options: [RAID 0] [RAID 1]
[RAID 10]
Stripe Size:
Specifies the size of single data block on the virtual disk. In general,
a larger stripe size is recommended for applications requiring large data transfers
such as audio, video, and graphics. A smaller stripe size is better for applications
with content in much smaller size, such as e-mails and documents.
Configuration options: [32K] [64K]
Gigabyte Rounding:
In the event of a single physical disk failure in a RAID 1
virtual disk, Gigabyte Rounding allows the replacement physical disk to be of a
size slightly smaller than the existing physical disk. The capacity of the rebuilt
virtual disk equals to the size of the smaller physical disk included in the RAID 1
array. The configuration options represent the tolerance value of drive capacity
difference.
Configuration options: [None] [1G] [10G]
Name:
Enter a name with 1–10 letters (no special characters) for the RAID
array.
5. Move the selection bar to
Next
and press <Enter>. The following warning
message appears:
Do you want to create this virtual disk ?
Y
es
N
o
Create Virtual Disk
Press <Y> to create the RAID array, or press <N> to cancel. The new RAID
array appears under Virtual Disks, as shown in the image below.
Marvell BIOS Setup (c) 2011 Marvell Technology Group Ltd.
Configure->Select free disksCreate Virtual Disk
Help
Virtual disk configurations.
ENTER: Select F10: Exit/Save ESC: Return
HBA 0: Marvell 0
├
Virtual Disks
└
Free Physical Disks
*
├
PD 0: ST3160812AS
*
└
PD 8: ST3160812AS
RAID Level : RAID 0
Max Size(MB) : 305253
Stripe Size : 64KB
Gigabyte Rounding : 1G
Quick Init : Yes
Name : Default
Threshold(%) : 90
Next
▶
▶
Summary of Contents for PIKE 9230
Page 1: ...PIKE 9230 SATA RAID card ...
