ASUS PCI-V775V2 User’s Manual
3
5. Remove the corresponding expansion slot cover from the
computer chassis. The slot cover is the metal strip in the
back of the computer chassis that covers the opening for the
adapter’s external connector.
6. Ground yourself to an antistatic mat or other grounded source.
7. Pick up the board (still in its sleeve) by grasping the edge
bracket with one hand. Avoiding touching board compo-
nents.
8. Remove the plastic sleeve.
9. Position the card directly over the PCI slot and insert one
end of the board in the slot first. Carefully press the bus
connector on the bottom of the card down into the slot. Be
sure the metal contacts on the bottom of the host adapter are
securely seated in the slot.
10.Anchor the board's mounting bracket to the computer chas-
sis using the screw from the slot cover you set aside previ-
ously.
11.Replace the cover on the system unit.
12.Connect your analog monitor's 15-pin VGA connector to
the card and fasten the retaining screws (if any).
I. Hardware Installation
I. H/W Installation
Procedures
