2
ASUS PCI-V775V2 User’s Manual
I. Hardware Installation
This section tells you how to install the ASUS PCI-V775V2
Video Card in your PC computer. The steps provided below
demonstrate how to install the cards in a typical system. Your
system may be slightly different.
IMPORTANT: Keep the host adapter in its antistatic bag
until you are ready to install it. Before you pick up the
adapter, ground yourself by touching an unpainted surface
on the computer chassis. Even a little static electricity can
destroy a host adapter component!
Installation Procedures
1. Unplug all electrical cords on your computer.
2. Remove the screws for the back of the system unit cover.
3. Remove the system unit cover.
4. Find an unused 5volt PCI bus expansion slot. Make sure
this slot is unobstructed.
WARNING: Computer boards and components contain
very delicate Integrated Circuit (IC) chips. To protect the
computer board and other components against damage from
static electricity, you should follow some precautions when-
ever you work on your computer.
1. Make sure that you unplug your power supply when add-
ing or removing expansion cards or other system com-
ponents. Failure to do so may cause severe damage to
both your motherboard and expansion cards.
2. Hold components by the edges and try not to touch the
IC chips, leads, or circuitry.
3. Use a grounded wrist strap before handling computer
components.
4. Place components on a grounded antistatic pad or on the
bag that came with the component whenever the compo-
nents are separated from the system.
I. H/W Installation
Procedures
