2-3
ASUS PB248 Series LCD Monitor
2.3
Connecting the cables
1.
Connect the cables as the following instructions:
To connect the power cord
•
: connect one end of the power cord securely to
the monitor’s AC input port, the other end to a power outlet.
To connect the VGA/HDMI/DVI/DisplayPort cable
•
:
Plug one end of the VGA/HDMI/DVI/DisplayPort cable to the monitor’s
a.
VGA/HDMI/DVI/DisplayPort jack.
Connect the other end of the VGA/HDMI/DVI/DisplayPort cable to your
b.
computer's VGA/HDMI/DVI/DisplayPort jack.
Tighten the two screws to secure the VGA/DVI connector.
c.
To connect the audio cable
•
:
connect one end of the audio cable to the
monitor’s Audio-in port, the other end to the computer’s audio-out port.
To use the earphone:
•
connect the end with plug type to the monitor’s
earphone jack when an HDMI or DisplayPort signal is fed.
To use the USB 3.0 ports
•
: Take the supplied USB 3.0 cable, and plug
the smaller end (type B) of the USB upstream cable to the monitor’s USB
upstream port, and the larger end (type A) to your computer’s USB 3.0 port.
Make sure your computer is installed with the lastest Windows 7 operating
system. That will enable the USB ports on the monitor to work.
When these cables are connected, you can choose the desired signal
from the Input Select item in the OSD menu.
2.4
Turning on the monitor
Press the power button . See page 1-2 for the location of the power button. The
power indicator lights up in white to show that the monitor is ON.
