Asus P9X79 WS User Manual Download Page 57

Page: 57 / 186

8. CPU, CPU OPT, Chassis fan connectors

(4-pin CPU_FAN; 4-pin CPU_OPT; 4-pin CHA_FAN1/2/3/4)

Connect the fan cables to the fan connectors on the motherboard, ensuring

that the black wire of each cable matches the ground pin of the connector.

• The CPU_FAN connector supports the CPU fan of maximum 2A (24 W) fan

power.

• If you install two VGA cards, we recommend that you plug the rear chassis

fan cable to the motherboard connector labeled CHA_FAN1, CHA_FAN2,

CHA_FAN3 for better thermal environment.

Do not forget to connect the fan cables to the fan connectors. Insufficient air

flow inside the system may damage the motherboard components. These are

not jumpers! Do not place jumper caps on the fan connectors!

ASUS P9X79 WS

2-29

Summary of Contents for P9X79 WS



























































































































































































Search results

Summary of Contents for P9X79 WS

Reviews:

Related manuals for P9X79 WS

Brands by name

Popular brands

Asus P9X79 WS, User Manual

Search results

Summary of Contents for P9X79 WS

Reviews:

Related manuals for P9X79 WS

Brands by name

Popular brands